VERTICAL BAND SAW

FEATURES

POWER FEED TABLE

The Electric-Controlled Power Table supplies 80 Kg-cm power to the object to benefit a continuous straight cut for productivity consideration. Cutting length can be adjusted as desired, (it does not have to be always cut-off) function can be switched to automatically stop after finish cutting so that the operator can be free for another task.

TRANSMISSION

VBS-1408 and VBS-1408E have a transmission as below. It provides variable speed through a speed reducer to cut most of the steel object.

VBS-1610 and VBS1610E are equipped with variable pulley combined with HI-LOW gearbox to bring the speed up to 1200 M/min. With the high speed, most of the material including non-metals can be done.

Product description

MODEL VBS-1408 VBS-1610 VBS-2012
…MAX. THROAT CAPACITY 356 mm ; 14 inch 396 mm ; 16 inch 508 mm ; 20 inch
…MAX. WORK HEIGHT 205 mm ; 8 inch 255 mm ; 10 inch 305 mm ; 12 inch
…WHEEL DIAMETER 368 mm ; 14 1/2 inch 408 mm ; 16 inch 515 mm ; 20 1/2 inch
…BLADE SPEED 60 Hz 25-100 M/min
82-330 F/min
Low 25-100,
HI 300-1200 M/min
Low 82-330,
HI 985-3950 F/min
Low 20-180,
HI 120-1000 M/min
Low 65-585,
HI 390-3280 F/min
50 Hz 20-80 M/min
65-265 F/min
Low 20-80,
HI 250-1000 M/min
Low 65-265,
HI 820-3280 F/min
…MAIN DRIVE MOTOR 1 HP ; 0.75 KW 2 HP ; 1.5 KW 2 HP ; 1.5 KW
…TABLE SIZE 500 x 500 mm
20 x 20 inch
550 x 600 mm
22 x 24 inch
600 x 560 mm24 x 22 1/2 inch
…TABLE TILT R-15 , L-12
8 EACH F&B
R-15 , L-12
8 EACH F&B
15 EACH L& R
8 EACH F& B
…TABLE HEIGHT 990 mm ; 39 inch 1000 mm ; 39 3/8 inch 1000 mm ; 39 3/8 inch
…MAX. BLADE LENGTH 2900 mm ; 114 inch 3140 mm ; 123 1/2 inch 3975 mm ; 165 1/2 inch
…MAX. BLADE WIDTH 13 mm ; 1/2 inch 16 mm ; 5/8 inch 25 mm ; 1 inch
…WELDER CAPACITY 13 mm ; 1/2 inch 16 mm ; 5/8 inch 19 mm ; 3/4 inch
…MEASUREMENT 850 x 600 x 1740 mm
34 x 24 x 68 1/2 inch
940 x 675 x 1840 mm
37 x 26 1/2 x 72 1/2 inch
1075 x 765 x 2000 mm
42 x 30 x 79 inch
…NET WEIGHT 275 kgs 410 kgs 510 kgs

NOTE: We reserve the right to modify and improve the specification without notice, the specification shown above is for reference only.

FEATURES

POWER FEED TABLE

The Electric-Controlled Power Table supplies 80 Kg-cm power to the object to benefit a continuous straight cut for productivity consideration. Cutting length can be adjusted as desired, (it does not have to be always cut-off) function can be switched to automatically stop after finish cutting so that the operator can be free for another task.

TRANSMISSION

VBS-1408 and VBS-1408E have a transmission as below. It provides variable speed through a speed reducer to cut most of the steel object.

VBS-1610 and VBS1610E are equipped with variable pulley combined with HI-LOW gearbox to bring the speed up to 1200 M/min. With the high speed, most of the material including non-metals can be done.

STANDARD EQUIPMENT
  • RIP FENCE
  • CHIP BLOWER
  • BLADE WELDER
  • BLADE GRINDER
  • BLADE SHEARER
  • 110 VOLT CIRCUITS
  • 110 VOLT WORK LIGHT
  • 3 PHASE POWER SUPPLY
  • OVER LOAD MEGNETIC STARTER
  • UPPER WHEEL TILT ASJUSTER
  • KEY SWITCH
  • EMERGENCY STOP SWITCH
  • POST ELEVATING HANDWHEEL
  • DIGITAL RENDOUT TACHOMETER
  • BLADE TENSION INDICATOR

Reviews

There are no reviews yet.

Be the first to review “VERTICAL BAND SAW”