Manford SP520TM

FEATURES

  • 10″ × 54″ Table , long saddle & box way on Y
  • Hardened & Ground Table with Ground T-Slot
  • 5HP Spindle Motor, Hi-Lo speed change by gear transmission (without no timing belt)
  • NST#40 Spindle Material Scm415(SAE4115)Hardened & Ground.
  • Bearing support to the motor shaft
  • Unique rigid design on spindle auto-feed, spline design on the pinion & clutch support
  • Turcite-B On X&Y Ways, Slideways and Gibs.
  • Hardened & Ground X&Y Slideways.
  • Electroless Nickel-Phosphorus Process On X&Y leadscrew with hardness 35 HRC.
  • Leadscrew nut made from PBC2, phosphor bronze
  • Highly Improved Vari-Speed Head
  • Lifting motors installed

Product description

Table size 10” x 54” (250 x 1370mm)
T slot of the spindle ( Qty X ) 3 x 0.629″ (3 X 16 mm)
Longitudinal travel ( W/O Power Feed ) 34″(870mm)
( with Power Feed) 30.5″ (775 mm)
Cross travel 16” (410mm)
Travel of Knee 17” (450mm)
Quill travel 5” (127mm)
Spindle to table nose (D) 3.3”- 21” (85-535mm)
SPINDLE
Spindle taper NST#40
Spindle speed (RPM) – Variable speed head 50 Hz LOW: 50 ~ 415 HIGH: 415 – 3600
60 Hz LOW: 60 ~ 500 HIGH: 500 ~ 4300
Quill travel 5” (127 mm)
Ram travel 22” (560 mm)
Over swivel on the turret 360º
Quill feeds (mm/rpm) 0.0015″ ~ 0. 003″ ~ 0.006″
Head swivel (R & L) +45º
Head tilt (up & down) Option
Spindle to column (E) 7”-29” (178-738mm)
MOTOR
Spindle motor 5 HP
MACHINE SIZE
Overall height 93 1/2” (2375mm)
Overall Depth 83 1/2” (2120mm)
Overall width 72.4” (1840mm)
Net weight 3500 lbs. (1600 Kgs)

NOTE: We reserve the right to modify and improve the specification without notice, the specification shown above is for reference only.

vertical machining center

Reviews

There are no reviews yet.

Be the first to review “Manford SP520TM”